Fujitsu DX80 S2/DX90 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
893
Selected: Notify
Cleared: Not notify
Selected (fixed): Always notify (This setting cannot be changed with this function.)
–: Not applicable to notification
*1: Host Sense Key Code Qualifier is not notified when pinned data disappears.
11.2.9.2 Display Event Log
This function displays the event history of the ETERNUS DX Disk storage system.
The event log is one of the internal logs stored in the ETERNUS DX Disk storage system. The event log contains
a history of events that are related to configuration information changes, such as module failures and volume
creation.
Up to 6400 (400 per CM-CPU) event logs can be displayed. Once the recorded event log is no longer required,
it can also be deleted.
Display event logs
The procedure to display event logs is as follows:
Procedure
1 Click [Display/Delete Event Log] in [Action].
Informational
Copy Table Size Usage
Rate Over
Cleared Cleared Cleared Cleared
Trial copy license expired Selected Selected Cleared Cleared
No Free Space on ODX
Buffer Volume
Cleared Cleared Cleared Cleared
SED Network Error
Recovered
Selected Selected Cleared
FC CA Port Link Status
Changed
Cleared Cleared Cleared Cleared
Host Login Over Cleared Cleared Cleared Cleared
Level Event Notification method
Host Sense
Key Code
Qualifier
SNMP Trap E-Mail syslog REMCS AIS
Connect
Even after deleting the event log using the [Delete Event Log] function, the maintenance information log
remains stored in the ETERNUS DX Disk storage system.
All event logs are deleted in a single operation.