Fujitsu DX80 S2/DX90 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 5 Volume Management
5.2 Functions in the Action Area for Volume
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
111
4 After selecting RAID groups is complete, click the [Create] button.
A confirmation screen appears.
When "Disk Type" is "SED", setting the same "Encryption" settings (the setting status of the key group)
is recommended for all of the RAID groups that configure the WSV.
An error screen appears in the following conditions:
When the "Name" is not input
When the name overlaps with an existing volume name for "Name"
When the "Name" does not satisfy the input conditions
When the "Enable" checkbox for "Use all Largest Free Space" is cleared and "Capacity" is not input
When the capacity that is specified for "Capacity" exceeds the maximum capacity that can be
created
When the "Enable" checkbox for "Use all Largest Free Space" is selected and the capacity of a
created WSV is 23MB or less
When the "Enable" checkbox for "Use all Largest Free Space" is selected and the capacity of a cre-
ated WSV exceeds the maximum capacity
When the "Set Value" checkbox is selected and "Volume No." is not input
When the input value of "Volume No." exceeds the settable range
When the specified "Volume No." is already used
When "Volume No." is specified and "Number of Volumes" is not "1"
When the "Number of Concatenation RAID Groups" field is left blank, "1" is specified, or a value
that is "65" or more is specified
When the maximum free space in the selected RAID group is smaller than the volume size that is
to be concatenated
When LDE is being performed in the RAID group