Filter
Top Products
Chapter 8 Advanced Copy Management
8.1 Advanced Copy Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
285
● Advanced Copy Path Status
• Local Port
The port information of the local device is displayed.
• Status
The port path status between the local and remote devices is displayed with an icon and a character string.
- Normal
The copy path is in normal status.
- Error
The copy path is in error status
• Remote Port WWN/iSCSI Name
The port WWN or iSCSI name of the remote device is displayed.
• IP Version
When the port type is iSCSI, the IP version for the destination iSCSI port of the copy path is displayed.
A "-" (hyphen) is displayed when the port type is FC.
- IPv4
- IPv6 (Link Local)
- IPv6 (Connect IP)
- "-" (hyphen)
• IP Address
When the port type is iSCSI, the IP address for the destination iSCSI port of the copy path is displayed.
The display format varies according to the IP version.
A "-" (hyphen) is displayed when the port type is FC.
- For IPv4 address
• xxx.xxx.xxx.xxx
xxx: 0 - 255 (decimal)
- For IPv6 address
• xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (hexadecimal, "a" - "f" are lowercase letters)
Refer to "IPv6 Address Notation" (page 378)
for details.
• Remote Port Mode
The remote port mode is displayed. This item is displayed only when the remote device is ETERNUS6000.
- Initiator
A dedicated port for sending
- Target
A dedicated port for downloading