Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
608
2 Select the iSCSI host bandwidth limit, and click the [Set] button.
• Bandwidth Limit
Select the maximum performance in IOPS (throughput value). If the bandwidth limit is not applied,
select "Unlimited".
→ A confirmation screen appears.
3 Click the [OK] button.
→ The iSCSI host QoS setting starts.
4 Click the [Done] button to return to the [iSCSI Host QoS] screen.
End of procedure
9.2.7.8 Set SAS Host QoS
This function configures the bandwidth limit (the maximum performance limit) of the SAS host.
This function can be used, irrespective of whether the Host-LU QoS has been enabled or disabled. However, if
the Host-LU QoS has been disabled, the host starts operating within the configured bandwidth limit after the
Host-LU QoS is enabled.