Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
466
• If the host response is changed for a host group that is configured with the host affinity setting,
the LUNs may not be able to be accessed from the host. Make sure to check the current LUN
settings and select a host response with an appropriate "Host Specific Mode" to change the
host response.
• The following modifications are applied for the host response settings with firmware version
V10L15 or later.
- "Others" is changed to "Default".
- "Windows EMPD", "Linux EMPD", and "Solaris EMPD" are deleted from the "Host Response"
value. However, these parameters are displayed if they are applied for host groups.
- The setting parameters for "Windows EMPD", "Linux EMPD", and "Solaris EMPD" are the
same as "Default". If one of the host responses that is described here is applied to a host
group, change the setting to "Default".
Available: The host can recognize LUNs
N/A: The host cannot recognize some LUNs
LUN settings for LUN groups
with host affinity settings
Host Specific Mode
Normal AIX Mode
NR1000V
Mode
HP-UX
Mode
BS2000
Mode
LUN#0 – LUN#255 Available Available Available Available Available
LUN#0 - LUN#511 N/A Available Available Available Available
LUN#0 - LUN#1023 N/A N/A N/A Available Available
LUN#0 - LUN#4095 N/A N/A N/A N/A Available