Filter
Top Products
Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
315
• When "Type" is "Thin Provisioning"
- Radio buttons to select a TPP
Select the TPP in which the ODX Buffer volume is created.
→ A confirmation screen appears.
TPPs that are registered in FTRPs are not displayed in the target Thin Provisioning Pool list.
When using the maximum free space in the RAID group to create an ODX Buffer volume without
specifying the capacity, select the "Enable" checkbox for "Use all Largest Free Space". A "Standard" type
volume can be created using the maximum free space.
An error screen appears in the following conditions:
• When the "Name" is not input
• When the name overlaps with an existing volume name for "Name"
• When the "Name" does not satisfy the input conditions
• When the "Enable" checkbox for "Use all Largest Free Space" is cleared and "Capacity" is not input
• When the "Enable" checkbox for "Use all Largest Free Space" is selected and the capacity of a
created ODX Buffer volume is less than 1GB
• When the "Enable" checkbox for "Use all Largest Free Space" is selected and the capacity of a
created ODX Buffer volume exceeds the maximum capacity
• When the capacity that is specified for "Capacity" exceeds the maximum capacity that can be
created
• When the maximum number of volumes that can be created is exceeded
• When free space in the RAID group or TPP is insufficient
• LDE is being performed in the target RAID group