Fujitsu DX80 S2/DX90 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
345
3 Click the [Download] button.
A dialog box to download the file appears.
4 Save the copy path information file.
The default file name is "RecPath_serial number for the ETERNUS DX Disk storage system_YYYY-MM-
DD_hh-mm-ss.bin". (YYYY-MM-DD_hh-mm-ss: the date and time when the download screen (Step 3
) is
displayed.)
5 Click the [Close] button to return to the [Copy Path] screen.
End of procedure
8.2.15 Export Storage Information
This function exports the FCRA/iSCSI-RA installation information in the ETERNUS DX Disk storage system, and
saves the information in a file.
The saved file can be used as device information when creating a copy path, so that manual registration of the
device information will not be required.
The procedure to export the REC device information is as follows:
Procedure
1 Click [Export Storage Info] in [Action].
The format of the device information file has been changed in controller firmware version V10L30. A device
information file that is obtained using an ETERNUS DX Disk storage system with controller firmware V10L3x
or later cannot be applied to an ETERNUS DX Disk storage system with V10L2x or earlier controller firmware
when creating a copy path information file. Note that a device information file that is obtained from an
ETERNUS DX Disk storage system with controller firmware V10L2x or earlier can be applied to an ETERNUS DX
Disk storage system with V10L3x controller firmware.