Filter
Top Products
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
779
The procedure to perform the SNMP Trap test is as follows:
Procedure
1 Click [Send SNMP Trap] in [Action].
2 Click the [Send] button.
→ A confirmation screen appears.
3 Click the [OK] button.
→ The SNMP Trap test is performed.
4 Click the [Done] button to return to the [Network] screen.
End of procedure
Confirm that the trap has been successfully received by SNMP Manager after the SNMP Trap test has
been performed.