Filter
Top Products
Chapter 7 Thin Provisioning Pool Management
7.1 Thin Provisioning Pool Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
202
7.1.2 Threshold (Thin Provisioning Pool)
This function shows the threshold for monitoring the used capacity of a Thin Provisioning Pool.
The following items are displayed in the Main area:
• No.
The TPP number is displayed. Click this item to display the screen shown in "7.1.6 Thin Provisioning Pool
Detail (Basic)" (page 209).
• Name
The TPP name is displayed. Click this item to display the screen shown in "7.1.6 Thin Provisioning Pool
Detail (Basic)" (page 209).
• Disk Type
The type of drive that configures the TPP is displayed.
- Online
SAS disks
- Nearline
Nearline SAS disks
- SSD
- SED
Registering the license for the Thin Provisioning feature is required to use Thin Provisioning function. To
check the registration status of the license, refer to "7.1.4 License (Thin Provisioning)" (page 206)
.
• If the TPP used capacity exceeds the threshold, notification is sent to the destination for REMCS (REMote
Customer Support system) center, SNMP Trap, E-Mail or syslog that was specified using the procedure in
"11.2.9.1 Setup Event Notification" (page 880)
.
• To change the threshold of a TPP, follow the procedure that is provided in "7.2.7 Modify Threshold Thin
Provisioning Pool" (page 239).