Filter
Top Products
Chapter 3 Initial Setup
3.1 Initial Setup 1
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
42
4 Proceed to [Set Date and Time].
4-1 Specify the following items, and click the [Next >>] button.
- Date/Time Information
- Time Zone
- Daylight Saving Time
- NTP Service
→ A confirmation screen appears.
4-2 Click the [OK] button.
→ Setting of the Date/time starts.
4-3 Click the [Done] button.
Click the [Skip] button to proceed to the next screen without setting.
If "NTP enabled" is selected for "NTP server" when there is no NTP server connection or when
communication with the NTP server is unstable, the required time for the date and time setting
may take longer. Wait until the screen is updated. Even if connection to the NTP server fails, the
date and time setting appear as though they have completed. To confirm that the ETERNUS DX
Disk storage system is successfully connected to the NTP server, use the procedure in "11.2.13.2
Modify Date and Time" (page 929) and check "Access Status" in the "NTP Service" field.