Filter
Top Products
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
1064
Appendix K
Error Code
The error codes for copy sessions are described below.
Error code Description
0x10 – 0x1F
An error that is caused by a copy source volume occurs.
Some copy source volumes cannot be accessed because a failure has occurred in a compo-
nent (e.g. drives and drive enclosures).
0x20 – 0x2F
An error that is caused by a copy destination volume occurs.
Some copy destination volumes cannot be accessed because a failure has occurred in a
component (e.g. drives and drive enclosures).
0x30 – 0x3F
An error that is caused by an REC path occurs.
The error location (Suspected Spot) is displayed in the "Detail Information" field on the [Copy
Path] screen. Refer to "8.1.6.2 Copy Path" (page 271)
for details.
0xBA A bad sector is detected.
0xBB SDV/SDP capacity is insufficient.
0xBD
Overload status is detected in a copy destination volume or a copy destination storage
system.
0xBE
A line has failed. Data is stored in the REC Buffer.
This error is displayed only when the "Type" is "REC".
0xBF
A line has failed. Data is stored in the REC Disk Buffer.
This error is displayed only when the "Type" is "REC".
Other than above An error other than the ones listed above occurs.