Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
510
The procedure to change the iSCSI information is as follows:
Procedure
1 Select the iSCSI host to changed the host information for, and click [Modify iSCSI Host] in
[Action].
2 Input new iSCSI host information and click the [Modify] button.
• Name
Input a new iSCSI host name.
An existing host name cannot be specified.
The following input conditions apply:
- Up to 16 alphanumeric characters and symbols (except ", (comma)" and "?")
- Space
• iSCSI Name
Input an iSCSI name of the iSCSI host.
The following input conditions apply:
- Alphabetic characters (lower case) and numeric characters
- Symbols "-" (hyphen), "." (period), and ":" (colon)
- The name starts with "iqn." or "eui."
- 4 - 223 characters
• Host Response
Select a new host response that is to be assigned to the iSCSI host.
The host response list created in the ETERNUS DX Disk storage system is displayed.
This item is available only when an iSCSI host is not registered in the host group.
- Solaris MPxIO
- HP-UX
- AIX EMPD (*1)
- AIX VxVM
- AIX Single Path
- VS850/SVC
- Host responses created in the ETERNUS DX Disk storage system
- Default
*1: EMPD: ETERNUS Multipath Driver