Filter
Top Products
Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
294
8.2.3 Stop Copy Session
This function stops the selected copy session.
This function is used when a session cannot be stopped due to a host error or other causes.
The procedure to stop a copy session is as follows:
Procedure
1 Select the copy session to be stopped (multiple selections can be made) and click [Stop
Session] in [Action].
→ A confirmation screen appears.
2 Click the [OK] button.
→ The selected copy session is stopped.
3 Click the [Done] button to return to the [Advanced Copy] screen.
End of procedure
• If one SnapOPC+ session is stopped, all the sessions started earlier than that session are also stopped.
• If one SnapOPC+ session is stopped, all the Restore OPC sessions started earlier than that session become
in error status.
• If a SnapOPC or SnapOPC+ session during a Restore OPC session is stopped, that Restore OPC session
becomes in error status.