Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
519
3 Click the [OK] button.
→ Registration of the FC port group starts.
4 Click the [Done] button to return to the [CA Port Group] screen.
End of procedure
9.2.3.2 Create iSCSI Port Group
This function creates a new iSCSI port group, and registers the port to be a member.
An iSCSI port group is a group of iSCSI-CA type ports that are connected to the specified host group. This
function configures the host affinity setting for each iSCSI port group.
• The maximum number of port groups per storage system is 128, irrespective of the CA types.
• The maximum number of ports per port group is 8.
• A port can be a member of several port groups.
An error screen appears in the following conditions:
• When the port group name overlaps with an existing port group name (port group names cannot
overlap with any other port group names, irrespective of the CA types)
• When the total number of ports has exceeded the maximum number for the ETERNUS DX Disk
storage system
• When no ports are registered in a port group, or when nine or more ports are registered in a port
group
• When the specified port does not exist in the ETERNUS DX Disk storage system
• When the port mode of the selected port is other than "FC"
• When there are ports of which affinity mode is enabled ("ON") and disabled ("OFF") existing
together