Filter
Top Products
Chapter 10 Component Management
10.1 Component Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
633
10.1.2.1 Controller Module
The CM information is displayed.
The following items are displayed in the Main area:
• CM
The CM number is displayed. By clicking this item, the [Controller Module] screen is displayed. Refer to
"10.1.5 Controller Module Detail" (page 652)
for display items.
• Status
The CM status is displayed. Refer to "B.5 Component Status" (page 977)
for details.
10.1.2.2 Controller Module (Performance)
The CM performance information is displayed.
If I/O offloading is enabled for the ETERNUS DX8700 S2, ROE#0 and ROE#1 are displayed for the ROE busy
ratio.
• Performance information is obtained when performance monitoring is operated from GUI, CLI, or any
other monitoring software. Refer to "11.2.12.4 Start/Stop Performance Monitoring" (page 925)
for details
on how to start performance monitoring with GUI.
• The interval for acquiring performance information can be specified when starting the monitoring. When
using GUI, the default interval is 30 seconds.
• The average performance values during the specified interval are displayed.