Filter
Top Products
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
839
2 Click the [OK] button.
→ Deleting of the key server starts.
3 Click the [Done] button to return to the [Key Management] screen.
End of procedure
11.2.6.5 Modify Key Server
This function changes the key server settings.
The procedure to change the key server settings is as follows:
Procedure
1 Select the key server that is to be changed and click [Modify Key Server] in [Action].
2 Specify the parameters, and click the [Modify] button.
• Domain Name / IP Address
Input the domain name (FQDN) or the IP address of the key server.
There are two methods to specify an IP address; "IPv4" and "IPv6". The following IPv6 addresses can
be used; "link local address", "global address", "unique local address", and "6to4 address". Refer to
"Available IPv6 Address" (page 757)
for details.
When the current setting is displayed, the IPv6 address is displayed as an abbreviation.
The following input conditions apply:
- For "Domain Name"
Up to 63 alphanumeric characters and symbols
- For IPv4 address
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
• Key server settings that are allocated to a key group can be changed.
• This function can be used to change "Domain Name / IP Address", "Port No.", and "LAN Port".
• This function can be used even when operations are being performed for the volumes that configures a
key management target RAID group.