Fujitsu DX80 S2/DX90 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
470
4 Click the [OK] button.
Modification of the FC host group starts.
5 Click the [Done] button to return to the [Host Group] screen.
End of procedure
9.2.2.7 Modify Host Group (iSCSI)
This function performs the following modifications to the existing iSCSI host group.
Changing the "Host Group Name" settings
Changing the "Host Response" settings
Changing the "Host" settings (including addition and deletion of member hosts in a host group)
Hosts can be added to host groups which the host affinity setting has been already configured, or deleted
from host groups.
If a host is added, the host affinity setting is automatically configured to the host, as a host group member.
If a host is deleted, the host affinity setting is cleared from the corresponding host.
An error screen appears in the following conditions:
When the "Host Group Name" is not entered
When the "Host Group Name" does not satisfy the input conditions
When the "Host Group Name" overlaps with an existing host group name
(Host group names cannot overlap with any other host group names, irrespective of the interface
types.)
When the several FC hosts with the same WWNs have been registered
When a host cannot recognize some LUNs
When no hosts are registered in a host group, or when nine or more hosts are registered in a host
group (for ETERNUS DX8700 S2, 65 or more hosts are registered in a host group)
When the total number of hosts has exceeded the maximum number for the ETERNUS DX Disk
storage system