Filter
Top Products
Chapter 6 RAID Group Management
6.2 Functions in the Action Area for RAID Group
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
198
The procedure to recover RAID groups that are in the locked status is as follows:
Procedure
1 Click [Recovery SED] in [Action].
→ A confirmation screen appears.
2 Click the [OK] button.
→ Recovery of the SED starts.
3 Click the [Done] button to return to the [SED Key Group] screen.
End of procedure
• SED recovery from locked status is performed according to the "Recovery Mode" setting of the key group.
The "Recovery Mode" setting can be checked in the [Key Group] screen. Refer to "11.1.5.1 Key Group"
(page 723) for details.
- When "Recovery Mode" is "Auto", the ETERNUS DX Disk storage system monitors the RAID group
periodically. If a locked RAID group is detected, recovery is performed on the RAID group by the
ETERNUS DX Disk storage system automatically.
- When "Recovery Mode" is "Manual", use this function to manually recover the locked RAID group.
• "Recovery Mode" can be specified when creating a key group. Refer to "11.2.6.6 Create Key Group" (page
841) for details.
• This function can be used even if a key group is not created or no locked RAID groups are exist. If there are
no locked RAID groups that can be recovered, this function completes successfully.