Filter
Top Products
Chapter 7 Thin Provisioning Pool Management
7.2 Functions in the Action Area for Thin Provisioning
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
239
The procedure to format an unformat area in the Thin Provisioning Pool is as follows:
Procedure
1 Select the TPP to be formatted (multiple selections can be made) and click [Format
Unformatted Area] in [Action].
→ A confirmation screen appears.
2 Click the [OK] button.
→ Format of unformat area in the Thin Provisioning Pool starts.
3 Click the [Done] button to return to the [Thin Provisioning Pool] screen.
End of procedure
7.2.7 Modify Threshold Thin Provisioning Pool
This function changes the threshold for monitoring the used capacity of Thin Provisioning Pool. There are two
types of threshold: "Warning" and "Attention".
The procedure to change the threshold of a TPP is as follows:
Procedure
1 Select the TPP for which the threshold is to be changed (multiple selections can be made)
and click [Modify Threshold] in [Action].
This function cannot be performed when there are no TPPs in the ETERNUS DX Disk storage system.
• This function changes the threshold of a TPP that is created by using the procedure in "7.2.1 Create Thin
Provisioning Pool" (page 219).
• The same threshold can be applied for multiple TPP in a single operation.