Fujitsu DX80 S2/DX90 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 11 System Management
11.1 System Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
712
Session ID
An identification number between 0 - 65535 for users who are logged in is displayed.
A session ID is obtained for each login and released with each logout. Because the session ID is obtained
discretely, the same session ID is not used even if the same user logs in again. GUI uses session IDs
between 1 - 999 and CLI (including SOFT) uses session IDs from 1001 onwards. An "*" (asterisk) is added
on top of the current user's (your) session ID.
- 0 - 65535
- For the current user's (your) session: * xxxxx (xxxxx: 0 - 65535)
User Name
The user name (user ID) for a user who is logged in is displayed. When the interface is "SOFT" (SMI-S or
DLM), the field is blank.
User Role
The user role for a user who is logged in is displayed.
- Monitor
- Admin
- StorageAdmin
- AccountAdmin
- SecurityAdmin
- Maintainer
- Software
- Custom role
Login Date
The login date and time are displayed.
- YYYY-MM-DD hh:mm:ss (YYYY: Year (2001 - 2037), MM: Month (01 - 12), DD: Day (01 - 31), hh: Hour
(00 - 23), mm: Minute (00 - 59), ss: Second (00 - 59))
Lock
If a logged in user is updating data that is managed by the ETERNUS DX Disk storage system, "Yes" is dis-
played. If a user is not updating data, "No" is displayed. When "Yes" is displayed for a user, other users with
"No" displayed cannot update data.
Note that multiple users cannot update data that is managed by the ETERNUS DX Disk storage system at
the same time. The storage system is exclusively used by a user who is updating the data. The exclusion is
released when the updating is complete.
IP Address
The IP address for a user who is logged in is displayed. When a user logged in from the AIS Connect server,
"AIS Connect Server" is displayed (for regions other than Japan). When the interface is "SOFT" (SMI-S), the
IP address is displayed only when logged in the ETERNUS DX Disk storage system via an external software.
When the interface is "SOFT" (DLM) or when the interface is "SOFT" (SMI-S) and the external software is not
used, the field is blank.
- For IPv4 address
xxx.xxx.xxx.xxx
xxx: 0 - 255 (decimal)
- For IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (hexadecimal, "a" - "f" are lowercase letters)
Refer to "IPv6 Address Notation" (page 378)
for details.