Filter
Top Products
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
880
11.2.9 Event/Dump Management
This section describes event/dump management.
Event/dump management provides the following functions:
• Setup Event Notification
• Display Event Log
• Export/Delete Log
• Export Panic Dump
11.2.9.1 Setup Event Notification
This function specifies whether to report events that are detected in the ETERNUS DX Disk storage system.
There are six methods for event notification: Host Sense Key Code Qualifier, SNMP Trap, E-Mail, syslog, REMCS
(for regions other than EMEA), and AIS Connect (for regions other than Japan).
A notification setting can be selected for each type of event.
• For SNMP Trap notification, performing procedures in "11.2.3.3 Setup SNMP Agent Basic Interface" (page
761), "11.2.3.4 Setup SNMP Manager" (page 763), "11.2.3.5 Setup SNMP Agent MIB Access View" (page
766), "11.2.3.6 Setup SNMP Agent User" (page 768), "11.2.3.7 Setup SNMP Agent Community" (page
771), and "11.2.3.8 Setup SNMP Agent Trap" (page 774) is required.
• For E-Mail notification, performing procedure in "11.2.3.12 Setup E-Mail Notification" (page 781)
is
required.
• For syslog notification, performing procedure in "11.2.3.13 Setup Syslog" (page 783)
is required.
• For REMCS notification, performing procedure in "11.2.4.2 Setup Remote Support" (page 800)
is required
(for regions other than EMEA).
• For AIS Connect notification, performing procedure in "11.2.5.1 Setup AIS Connect Environment" (page
821) is required (for regions other than Japan).
• When selecting REMCS for event notification, only the REC related error event settings can be changed.
• In the following sections, "REMCS (for regions other than EMEA)" is referred to as "REMCS" and "AIS Con-
nect (for regions other than Japan)" is referred to as "AIS Connect".