Filter
Top Products
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
809
The procedure to update communication environment information is as follows:
Procedure
1 Click [Update Connection Info] in [Action].
2 Specify the parameters, and click the [Set] button.
● Information File
• Communication Environment Information File
Import the "communication environment information file", which was created using the REMCS
ESAT, to the ETERNUS DX Disk storage system.
Click the [Browse...] button to specify the communication environment information file, or directly
input the path to the communication environment information file.
● Communication Environment Information
• Connection
- Connection Type
Select the connection type when using the REMCS operation.
• Internet Connection
• Internet Connection (Mail only)
• P-P Connection
• P-P Connection (Mail only)
• P-P Connection (VPN Connection)
• P-P Connection (VPN Connection Mail only)
- LAN Port used for Remote Support
Select the LAN port of the ETERNUS DX Disk storage system that is used for REMCS operation
from "MNT" or "RMT".
The Remote Support setting information file (customer information file) created by using REMCS
Environment Setup Assist Tool (REMCS ESAT) can be imported to the ETERNUS DX Disk storage system, to
simplify the input operation required to be set for each storage system.
When importing Remote Support settings to the ETERNUS DX Disk storage system all at once, click
the [Browse...] button to specify the location where the settings file has been stored, and click the
[Import] button.