Filter
Top Products
Chapter 7 Thin Provisioning Pool Management
7.2 Functions in the Action Area for Thin Provisioning
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
250
The procedure to stop balancing FTRP is as follows:
Procedure
1 Select the FTRP for which balancing is to be stopped and click [Stop Balancing FTRP] in
[Action].
→ A confirmation screen appears.
2 Click the [OK] button.
→ FTRP balancing stops.
3 Click the [Done] button to return to the [Flexible Tier Pool] screen.
End of procedure
If FTRP balancing has stopped, the following conditions apply.
• All of the balancing sessions that are currently being performed (*1) for the FTVs registered in the target
FTRP are stopped. Even when balancing sessions are being stopped, FTVs that are not being balanced can
be accessed normally.
• Note that completed balancing processes for the FTVs in the target FTRP (*1) cannot be stopped (the
physical allocation after the balancing process cannot be changed). FTVs that are balanced can be
accessed normally.
*1: When an FTRP balancing session is started, FTV balancing starts in the FTSPs. Refer to "7.2.12 Start Balancing
Flexible Tier Pool" (page 248) for details.