Fujitsu DX80 S2/DX90 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
513
3 Click the [OK] button.
Changing of the iSCSI host information starts.
4 Click the [Done] button to return to the [iSCSI Host] screen.
End of procedure
An error screen appears in the following conditions:
- When the "Name" is not input
- When the "Name" does not satisfy the input conditions
- When the "Name" already exists
- When the "iSCSI Name" is not input
- When the "iSCSI Name" does not satisfy the input conditions
- When the "IP Address" does not satisfy the input conditions
- When several iSCSI hosts with the same "IP Address" and "iSCSI Name" have been configured
- When several iSCSI hosts have been specified with the same "iSCSI Name" when the IP
addresses have not been entered
- When the "Alias Name" does not satisfy the input conditions
- When the "Alias Name" overlaps the existing Alias name
- When the "CHAP User ID" does not satisfy the input conditions
- When the "CHAP Password" does not satisfy the input conditions
- When the "Confirm CHAP Password" does not satisfy the input conditions
- When either of the "CHAP User ID" or the "CHAP Password" has been specified
- When the "CHAP Password" and the "Confirm CHAP Password" do not match
- When there are some LUNs that cannot be recognized from the iSCSI host because the "Host
Response" setting has been changed (only for iSCSI hosts that are not registered in a host
group)