Filter
Top Products
Chapter 1 Outline
1.5 Screen Operations
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
23
■ Hardware Components
The number of components for each status is displayed.
• Normal
- Modules
The number of components in normal status (*1) is displayed.
- Disks
The number of drives in normal status is displayed.
• Warning
- Modules
The number of components in warning status (*1) is displayed.
- Disks
The number of drives in warning status is displayed.
• Error
- Modules
The number of components in error status (*1) is displayed.
- Disks
The number of drives in error status is displayed.
*1: The number of components that can be maintained. The number of components does not include the number of
drives.
■ System information
The information of the ETERNUS DX Disk storage system is displayed.
• Storage System Name
The name for the ETERNUS DX Disk storage system is displayed.
When logged in with a user account that can display detailed component information (*1), a link is
displayed on the storage system name.
Click this link to display the [Storage] screen in the [Component] navigation.
• ETERNUS DX8700 S2:
An LCD message is displayed if a component with failed status, a component with warning status, a
storage system with failed status, or a storage system with warning status is detected. The contents of
a message that is to be displayed are the same as the contents of the LCD panel messages on the
Operation panel. It is possible to specify whether to display LCD messages (equivalent to the LCD
panel message on the Operation Panel) by using the [Setup Event Notification] function. Refer to
"11.2.9.1 Setup Event Notification" (page 880)
for details. Because it is possible to specify whether to
display the LCD messages by using the [Setup Event Notification] function, the message displayed
might not match the status display for the corresponding component.
System message