Fujitsu DX80 S2/DX90 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
912
4 Click the [OK] button.
Storage Migration starts.
5 Click the [Done] button to return to the [Storage Migration] screen.
End of procedure
11.2.11.2 Download Template File for Storage Migration Settings
This function downloads the template of the Storage Migration setting file.
In the Storage Migration setting file, specify the destination CA port, source WWN, source LUN, and
destination volumes.
Refer to the [Storage Migration] screen for progress status of Storage Migration.
Click the [Path Group] link to display the "11.1.14 Path Group Detail Information" (page 734)
.
There are two types of template files for Storage Migration; new format template files and old format
template files. A template file in the new format can be downloaded when the controller firmware
version is V10L30 or later. A template file in the old format can be downloaded when the controller
firmware version is older than V10L30. A template file with the new format supports the following items:
- The operation mode for the Storage Migration can be specified.
- If a source LUN is between "0" and "255", the source LUN can be specified with a decimal number.
- Destination volumes can be specified with decimal numbers.
To distinguish between a new format and an old format template file, check whether the identification
code "eternus-storage-migration-0101" is included. A template file with the new format has an
identification code. Identification codes are not included in old format template files.
Refer to "Appendix I Storage Migration Setting Files" (page 1019)
for details about the Storage Migration
setting files.