Filter
Top Products
Appendix J Factory Default List
J.2 Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
1035
Modify FC Port
Parameters
(When the port
mode is "Initiator")
Connection FC-AL
• Fabric
• FC-AL
Set Loop ID Manual
• Manual
• Auto
Loop ID When "Set Loop ID" is "Manual"
• 0x0
When "Set Loop ID" is "Auto"
• Ascending
When "Set Loop ID" is "Manual"
• 0x0 – 0x7D
When "Set Loop ID" is "Auto"
• Ascending
• Descending
Transfer Rate Auto-negotiation
• Auto-negotiation
• 1 Gbit/s
• 2 Gbit/s
• 4 Gbit/s
• 8 Gbit/s
• 16 Gbit/s
The available transfer rate varies
depending on the CA type.
Frame Size 2048
• 512 (bytes)
• 1024 (bytes)
• 2048 (bytes)
WWN (Port Name) WWPN of the ETERNUS DX Disk
storage system
• WWPN (16-digit hexadecimal)
WWN (Node Name) WWNN of the ETERNUS DX Disk
storage system
• WWNN (16-digit hexadecimal)
Modify iSCSI Port
Parameters
(When the port
mode is "CA")
IP Version IPv4
• IPv4
• IPv6
• IPv4 / IPv6
IP Address 192.168.xxx.xxx
• Up to 3 numeric characters
• First text box
1 – 255
• Other text boxes
0 – 255
Subnet Mask 255.255.255.0
• Up to 3 numeric characters
• All text boxes
0 – 255
IPv6 Link Local
Address
Address that is obtained from the
WWN of the ETERNUS DX Disk
storage system
• fe80::xxxx:xxxx:xxxx:xxxx
xxxx: 0 – ffff (FFFF)
(hexadecimal, alphanumeric
characters)
TCP Port No. 3260
• 0 – 28671
TCP Window Scale 2
• 0 – 14
Congestion Control
Option
Enable
• Enable
• Disable
Function Setting item Default value Allowed input