Filter
Top Products
129 www.national.com
CP3BT26
Table 52 Buffer Status Section of the CNSTAT Register
ST3 (DIR) ST2 ST1 ST0 (BUSY) Buffer Status
000 0RX_NOT_ACTIVE
000 1
Reserved for RX_BUSY. (This condition indicates that soft-
ware wrote RX_NOT_ACTIVE to a buffer when the data
copy process is still active.)
001 0RX_READY
001 1
RX_BUSY0 (Indicates data is being copied for the first time
RX_READY
→ RX_BUSY0.)
0 1 0 0 RX_FULL
010 1
RX_BUSY1 (Indicates data is being copied for the second
time RX_FULL
→ RX_BUSY1.)
0 1 1 0 RX_OVERRUN
011 1
RX_BUSY2 (Indicates data is being copied for the third or
subsequent times RX_OVERRUN
→ RX_BUSY2.)
1 0 0 0 TX_NOT_ACTIVE
100 1
Reserved for TX_BUSY. (This state indicates that software
wrote TX_NOT_ACTIVE to a transmit buffer which is sched-
uled for transmission or is currently transmitting.)
110 0TX_ONCE
110 1
TX_BUSY0 (Indicates that a buffer is scheduled for trans-
mission or is actively transmitting; it can be due to one of
two cases: a message is pending for transmission or is cur-
rently transmitting, or an automated answer is pending for
transmission or is currently transmitting.)
1 0 1 0 TX_RTR (Automatic response to a remote frame.)
1 0 1 1 Reserved for TX_BUSY1. (This condition does not occur.)
1 1 1 0 TX_ONCE_RTR (Changes to TX_RTR after transmission.)
111 1
TX_BUSY2 (Indicates that a buffer is scheduled for trans-
mission or is actively transmitting; it can be due to one of
two cases: a message is pending for transmission or is cur-
rently transmitting, or an automated answer is pending for
transmission or is currently transmitting.)