Filter
Top Products
51 www.national.com
CP3BT26
11.0 Triple Clock and Reset
The Triple Clock and Reset module generates a 12 MHz
Main Clock and a 32.768 kHz Slow Clock from external
crystal networks or external clock sources. It provides vari-
ous clock signals for the rest of the chip. It also provides the
main system reset signal, a power-on reset function, Main
Clock prescalers to generate two additional low-speed
clocks, and a 32-kHz oscillator start-up delay.
Figure 4 is block diagram of the Triple Clock and Reset mod-
ule.
Figure 4. Triple Clock and Reset Module
Reset
Module
Device Reset
Stretched
Reset
Stop Main Osc
Good Main Clock
Power-On-Reset
Module (POR)
Start-Up-Delay
14-Bit Timer
TWM (Invalid Watchdog Service)
Flash Interface (Program/Erase Busy)
External Reset
Good Slow Clock
Start-Up-Delay
8-Bit Timer
Auxiliary Clock 1
4-Bit Aux1
Prescaler
Auxiliary Clock 2
4-Bit Aux2
Prescaler
Slow Clock
Slow Clock
Select
Main Clock
8-Bit
Prescaler
Mux
Slow Clock Prescaler
Preset
Time-out
System Clock
Fast Clock
Select
Mux
4-Bit
Prescaler
Fast Clock
Prescaler
PLL
(x3, x4, or x5)
Stop Slow Osc
Bypass
32 kHz Osc
Div.
by 2
Reset
Preset
Stop Main Osc.
High Frequency
Oscillator
X1CKI
X1CKO
Low Frequency
Oscillator
X2CKI
X2CKO
PLL Clock
Bypass PLL
Mux
Stop PLL
Stop PLL
Good PLL Clock
DS006