xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
102
config stp version
Purpose
Used to globally set the version of STP on the Switch.
Syntax
config stp version [mstp | rstp | stp]
Description
This command is used to choose the version of the spanning tree to be implemented on the
Switch.
Parameters
mstp – Selecting this parameter will set the Multiple Spanning Tree Protocol (MSTP) globally on
the Switch.
rstp − Selecting this parameter will set the Rapid Spanning Tree Protocol (RSTP) globally on the
Switch.
stp − Selecting this parameter will set the Spanning Tree Protocol (STP) globally on the Switch.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To set the Switch globally for the Multiple Spanning Tree Protocol (MSTP):
DES-3200-28:4#config stp version mstp
Command: config stp version mstp
Success.
DES-3200-28:4#