D-Link DES-3200 Switch User Manual


 
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
27
config terminal_line
Purpose
Used to configure the number of rows which can be displayed on a
screen.
Syntax
config terminal_line [ default | <value 20-80>]
Description
This command is used to configure the number of rows which can be
displayed on a screen. The default value is 24.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure the terminal line to display 30 rows:
DES-3200-28:4#config terminal_line 30
Command: config terminal_line 30
Success.
DES-3200-28:4#
show terminal_line
Purpose
Used to show the number of rows which can be displayed on the
screen.
Syntax
show terminal_line
Description
This command is used to show the number of rows which can be
displayed on the screen.
Parameters
None.
Restrictions
None.
Example usage:
To show the current number of rows that can be displayed:
DES-3200-28:4#show terminal_line
Command: show terminal_line
Terminal Line : 24 (Default)
DES-3200-28:4#