Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
294
The SMTP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following
table:
Command Parameters
enable smtp
disable smtp
config smtp {server <ipaddr> | server_port <tcp_port_number 1-65535> |
self_mail_addr <mail_addr 64> | [add mail_receiver <mail_addr
64> | delete mail_receiver <index 1-8>]} (1)
show smtp
smtp send_testmsg
Each command is listed, in detail, in the following sections:
enable smtp
Purpose
Used to enable the Switch as a SMTP client.
Syntax
enable smtp
Description
This command, in conjunction with the disable smtp command
will enable and disable the Switch as a SMTP client without
changing configurations.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To enable SMTP on the Switch:
DES-3200-28:4#enable smtp
Command: enable smtp
Success.
DES-3200-28:4#
disable smtp
Purpose
Used to disable the Switch as a SMTP client.
Syntax
disable smtp
Description
This command, in conjunction with the enable smtp command
will enable and disable the Switch as a SMTP client without
changing configurations.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To disable SMTP on the Switch: