Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
492
61
PPPOE CIRCUIT ID INSERTION COMMANDS
PPPoE Circuit ID Insertion is used to produce the unique subscriber mapping capability that is possible on ATM networks
between ATM-DSL local loop and the PPPoE server. The PPPoE server will use the inserted Circuit Identifier sub-tag of the
received packet to provide AAA services (Authentication, Authorization and Accounting). Through this method, Ethernet
networks can be as the alternative of the ATM networks.
The PPPoE Circuit ID Insertion commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table:
Command Parameters
config pppoe circuit_id_insertion state [ enable | disable ]
config pppoe circuit_id_insertion ports <portlist> { circuit_id [ mac | ip | udf <string 32> ] | state [enable |
disable ] } (1)
show pppoe circuit_id_insertion
show pppoe circuit_id_insertion ports {<portlist>}
Each command is listed, in detail, in the following sections: