Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
509
Password change activity
User <username> Password was changed by (Username:
<username>, IP:<ipaddr>)
Informational
Password change activity
by console
U
ser <username> Password was changed by console
(Username: <username>)
Informational
Safeguard
Engine
Safeguard Engine is in
normal mode
Safeguard Engine enters NORMAL mode Informational
Safeguard Engine is in
exhausted mode
Safeguard Engine enters EXHAUSTED mode Warning
Packet Storm
Broadcast strom
occurrence
Port <portNum> Broadcast storm is occurring Warning
Broadcast storm cleared Port <portNum> Broadcast storm has cleared Informational
Multicast storm occurrence Port <portNum> Multicast storm is occurring Warning
Multicast storm cleared Port <portNum> Multicast storm has cleared Informational
Port shutdown due to a
packet storm
Port <portNum> is currently shutdown due to a packet
storm
Warning
Gratuitous
ARP
Conflict IP was detected
with this device
Conflict IP was detected with this device (IP: <ipaddr>,
MAC: <macaddr>, Port <portNum>), Interface:
<interface>)
Informational
802.1X
Radius server assigned
VID: to port
Radius server <server_ip> assigned VID: <VLAN_ID> to
Port <portNum> (Account: <user_account>)
Informational
Radius server assigned
ingress bandwith: Kbits to
port
Radius server <server_ip> assigned ingress bandwith:
<bandwidth_value>Kbits to Port<portNum> (Account:
<user_account>)
Informational
Radius server assigned
i
ngress bandwith: no limit
to port
Radius server <server_ip> assigned ingress bandwith: no
limit to Port <portNum> (Account: <user_account>)
Informational
Radius server assigned
egress bandwidth: Kbits to
port
Radius server <server_ip> assigned egress ba
ndwidth:
<bandwidth_value> Kbits to Port <portNum> (Account:
<user_account>)
Informational
Radius server assigned
egress bandwithno limit to
Port
Radius server <server_ip> assigned egress bandwith: no
limit to Port<portNum> (Account: <user_account>)
Informational
Radius server assigned
802.1p default priority: to
Port
Radius server <server_ip> assigned 802.1p default
priority: <priority 0-
7> to Port <portNum> (Account:
<user_account>)
Informational
802.1x Authentication
failure
802.1x Authenticatio
n failure from (Username:
<user_account>, Port <portNum>, MAC: <macaddr>)
Warning
802.1x Authentication
failure for the radius server
802.1x Authentication failure for the radius server
<server_ip> timeout from (Username: <user_account>,
Port <portNum>, MAC: <macaddr>)
Warning
802.1x Authentication
failure for the 802.1X client
session timeout
802.1x Authentication failure for the 802.1X client session
timeout from (Username: <user_account>, Port
<portNum>, MAC: <macaddr>)
Warning
802.1x Authentica
tion
success
802.1x Authentication success from (Username:
<user_account>, Port <portNum>, MAC: <macaddr>)
Informational
Loopback Port loop occurred Port <portNum> LBD loop occurred. Port blocked. Critical
Port loop detection
restarted after interval time
Port <portNum> LBD port recovered. Loop detection
restarted.
Informational
Port with VID loop
occurred
Port <portNum> VID <vlanID> LBD loop occurred. Packet
discard begun.
Critical