Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
235
DES-3200-28:4#config arp_aging time 30
Command: config arp_aging time 30
Success.
DES-3200-28:4#
show arpentry
Purpose
Used to display the ARP table.
Syntax
show arpentry {ipif [System] | ipaddress <ipaddr> | static}
Description
This command is used to display the current contents of the Switch’s ARP
table.
Parameters
ipif [System] − The name of the IP interface, the end node or station for which
the ARP table entry was made, resides on.
ipaddress <ipaddr> − The network address corresponding to the IP interface
name above.
static – Displays the static entries to the ARP table.
Restrictions
None.
Example Usage:
To display the ARP table:
DES-3200-28:4#show arpentry
Command: show arpentry
ARP Aging Time : 20
Interface IP Address MAC Address Type
------------- --------------- ----------------- ---------------
System 10.0.0.0 FF-FF-FF-FF-FF-FF Local/Broadcast
System 10.6.51.15 00-1D-60-E7-B5-CD Dynamic
System 10.22.8.50 00-80-C8-DF-E8-EE Dynamic
System 10.30.28.112 00-30-28-01-12-02 Dynamic
System 10.39.77.24 08-00-01-43-00-00 Dynamic
System 10.44.8.253 00-44-08-FD-09-09 Dynamic
System 10.53.7.12 00-50-BA-11-11-04 Dynamic
System 10.56.85.10 00-0E-A6-8F-72-EA Dynamic
System 10.67.33.67 00-00-E2-58-DB-CF Dynamic
System 10.71.77.126 00-04-96-20-D5-25 Dynamic
System 10.73.21.11 00-19-5B-EF-78-B5 Local
System 10.73.60.106 00-00-00-11-12-13 Dynamic
System 10.90.90.90 00-21-91-21-34-03 Dynamic
System 10.255.255.255 FF-FF-FF-FF-FF-FF Local/Broadcast
Total Entries : 14
DES-3200-28:4#
clear arptable
Purpose
Used to remove all dynamic ARP table entries.
Syntax
clear arptable