Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
267
enable admin
Restrictions
None.
Example usage:
To enable administrator privileges on the Switch:
DES-3200-28:4#enable admin
Password: ******
DES-3200-28:4#
config admin local_enable
Purpose
Used to configure the local enable password for administrator level
privileges.
Syntax
config admin local_enable
Description
This command is used to configure the locally enabled password for
the enable admin command. When a user chooses the
“local_enable” method to promote user level privileges to
administrator privileges, he or she will be prompted to enter the
password configured here that is set locally on the Switch.
Parameters
<password 15> − After entering this command, the user will be
prompted to enter the old password, then a new password in an
alphanumeric string of no more than 15 characters, and finally
prompted to enter the new password again for confirmation. See the
example below.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure the password for the “local_enable” authentication method.
DES-3200-28:4#config admin local_enable
Command: config admin local_enable
Enter the old password:
Enter the case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DES-3200-28:4#