Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
416
53
TECHNICAL SUPPORT COMMANDS
The Technical Support commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table:
Command Parameters
show tech_support
upload
tech_support_toTFTP
<ipaddr> <path_filename 64>
Each command is listed, in detail, in the following sections:
show tech_support
Purpose
Used to show the information for technical support.
Syntax
show tech_support
Description
This command is especially used by the technical support personnel to
dump the device’s overall operation information. The information is
project dependent and includes the following information.
Basic System information
system log
Running configuration
Layer 1 information
Layer 2 information
Layer 3 information
Application
OS status
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To display technical support information on the Switch: