Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
400
config mac_based_access_control auth_failover
Purpose
Used to configure MAC-based access control authentication failover.
Syntax
config mac_based_access_control auth_failover [enable | disable]
Description
When the authentication failover is disabled, if RADIUS servers are
unreachable, the authentication will fail. When the authentication
failover is enabled, if RADIUS server authentication is unreachable, the
local database will be used to do the authentication. By default, the
state is disabled.
Parameters
enable – Enable the protocol authentication failover.
disable – Disable the protocol authentication failover.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To enable MAC-based access control authentication failover:
DES-3200-28:4#config mac_based_access_control auth_failover enable
Command: config mac_based_access_control auth_failover enable
Success.
DES-3200-28:4#
config mac_based_access_control guest_vlan ports
Purpose
Used to configure MAC-based access control guest VLAN ports.
Syntax
config mac_based_access_control guest_vlan ports <portlist>
Description
This command is used configure MAC-based access control guest
VLAN ports.
Parameters
portlist – The list of ports to be configured.
Restrictions
Only Administrator-level users can issue this command.
Example usage
To configure MAC-based access control guest VLAN ports:
DES-3200-28:4#config mac_based_access_control guest_vlan ports 1-2
Command: config mac_based_access_control guest_vlan ports 1-2
Success.
DES-3200-28:4#