Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
271
config ssh server
Restrictions
Only Administrator-level users can issue this command.
Usage example:
To configure the SSH server:
DES-3200-28:4# config ssh server maxsession 2 contimeout 300 authfail 2
Command: config ssh server maxsession 2 contimeout 300 authfail 2
Success.
DES-3200-28:4#
show ssh server
Purpose
Used to display the SSH server setting.
Syntax
show ssh server
Description
This command is used to display the current SSH server setting.
Parameters
None.
Restrictions
None.
Usage example:
To display the SSH server:
DES-3200-28:4# show ssh server
Command: show ssh server
SSH Server Status : Disabled
SSH Max Session : 8
Connection Timeout : 120 (sec)
Authenticate Failed Attempts : 2
Rekey Timeout : never
Listened Port Number : 22
DES-3200-28:4#
config ssh user
Purpose
Used to configure the SSH user.
Syntax
config ssh user <username 15> authmode [hostbased [hostname
<domain_name 32>] [hostname_IP <domain_name 32> <ipaddr>] |
password | publickey]
Description
This command is used to configure the SSH user authentication
method.
Parameters
<username 15> − Enter a username of no more than 15 characters to
identify the SSH user.
authmode – Specifies the authentication mode of the SSH user wishing
to log on to the Switch. The administrator may choose between:
hostbased – This parameter should be chosen if the user wishes to
use a remote SSH server for authentication purposes. Choosing
this parameter requires the user to input the following information
to identify the SSH user.