Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
94
DES-3200-28:4#config syslog host 1 severity all facility local0
Command: config syslog host all severity all facility local0
Success.
DES-3200-28:4#
To configure a syslog host for all hosts:
DES-3200-28:4#config syslog host all severity all facility local0
Command: config syslog host all severity all facility local0
Success.
DES-3200-28:4#
delete syslog host
Purpose
Used to remove a syslog host that has been previously configured,
from the Switch.
Syntax
delete syslog host [<index 1-4> | all]
Description
This command is used to remove a syslog host that has been
previously configured from the Switch.
Parameters
<index 1-4> − Specifies that the command will be applied to an index
of hosts. There are four available indexes, numbered 1 through 4.
all − Specifies that the command will be applied to all hosts.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To delete a previously configured syslog host:
DES-3200-28:4#delete syslog host 4
Command: delete syslog host 4
Success.
DES-3200-28:4#