Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
410
enable authorization attributes
Purpose
The enable authorization command globally enables the authorization for attributes function.
Syntax
enable authorization attributes
Description
Used to enable authorization attributes. When enabled, authorized attributes (for example
VLAN, 802.1p default priority, and ACL) assigned by the RADUIS server or local database.
Which attributes will be accepted depends on the individual module’s setting.
Authorization for attributes is disabled by default.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
This example sets authorization global state to enabled:
DES-3200-28F:4# enable authorization attributes
Command: enable authorization attributes
Success.
DES-3200-28F:4#
disable authorization attributes
Purpose
The disable authorization attributes command globally disables the
authorization attributes function.
Syntax
disable authorization attributes
Description
Used to disable authorization attributes.
When the authorization for attributes is disabled, the authorized attributes (for
example VLAN, 802.1p default priority, and ACL) assigned by the RADUIS server or
local database will be ignored even if the individual module’s setting is enabled.
Authorization for attributes is disabled by default.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
This example sets authorization global state disabled:
DES-3200-28F:4# disable authorization attributes
Command: disable authorization attributes
Success.
DES-3200-28F:4#