Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
77
disable autoconfig
Purpose
Use this to deactivate auto configuration from DHCP.
Syntax
disable autoconfig
Description
This command is used to instruct the Switch not to accept auto
configuration instruction from the DHCP server. This does not change
the IP settings of the Switch. The ipif settings will continue as DHCP
client until changed with the config ipif command.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To stop the auto configuration function:
DES-3200-28:4#disable autoconfig
Command: disable autoconfig
Success.
DES-3200-28:4#
show autoconfig
Purpose
Used to display the current autoconfig status of the Switch.
Syntax
show autoconfig
Description
This command is used to list the current status of the auto
configuration function.
Parameters
None.
Restrictions
None.
Example usage:
To display the autoconfig status:
DES-3200-28:4#show autoconfig
Command: show autoconfig
Autoconfig State: Disabled
Timeout : 50 sec
DES-3200-28:4#