Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
349
config lldp ports dot3_tlvs
Restrictions
Only Administrator-level users can issue this command.
Example usage
To configure the MAC/PHY configuration/status TLV from the outbound LLDP advertisements for all ports:
DES-3200-28:4#config lldp ports all dot3_tlvs mac_phy_configuration_status
enable
Command: config lldp ports all dot3_tlvs mac_phy_configuration_status enable
Success.
DES-3200-28:4#
config lldp forward_message
Purpose
Used to configure forwarding of LLDP DU packets when LLDP is
disabled.
Syntax
config lldp forward_message [enable | disable]
Description
When LLDP is disabled and LLDP forward message is enabled, the
received LLDP DU packets will be forwarded. The default state is
disable.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage
To configure the LLDP forward LLDPU DU:
DES-3200-28:4# config lldp forward_ message enable
Command: config lldp forward_ message enable
Success.
DES-3200-28:4#
show lldp
Purpose
This command displays the Switch’s general LLDP configuration status.
Syntax
show lldp
Description
This command is used to display the Switch’s general LLDP
configuration status.
Parameters
None.
Restrictions
None.
Example usage
To display the LLDP system level configuration status: