xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
471
disable bpdu_protection
Purpose
Used to disable BPDU attack protection on the Switch.
Syntax
disable bpdu_protection
Description
Use this to disable BPDU attack protection on the entire Switch. Note that if BPDU attack
protection is disabled globally, it will also be disabled for ports regardless of the config
bpdu_protection ports settings.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To disable BPDU attack protection on the entire Switch:
DES-3200-28F:4# disable bpdu_protection
Commands: disable bpdu_protection
Success.
DES-3200-28F:4#
show bpdu_protection
Purpose
Used to display BPDU attack protection settings on the Switch.
Syntax
show bpdu_protection {ports {<portlist> }}
Description
Use this to view the global or per port BPDU attack protection configuration.
Parameters
ports – Specify to view the BPDU attack protection port configuration.
<portlist>- Specify the ports to display. If none is specified, all ports BPDU attack
protection configuration will be listed.
Restrictions
None.
Example usage:
To display global settings for BPDU protection:
DES-3200-28F:4# show bpdu_protection
Commands: show bpdu_protection
BPDU Protection Global Settings
---------------------------------------
BPDU Protection Status : Enabled
BPDU Protection Recovery Time : 60 seconds
BPDU Protection Trap State : None
BPDU Protection Log State : None
DES-3200-28F:4#
Example usage:
To display BPDU protection settings for ports: