Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
411
show authorization
Purpose
Used to display authorization for attributes status.
Syntax
show authorization
Description
Used this to view authorization for attributes status.
Parameters
None.
Restrictions
None.
Example usage:
This example displays authorization status:
DES-3200-28F:4# show authorization
Command: show authorization
Authorization for Attributes: Enabled
DES-3200-28F:4#
config mac_based_access_control trap state
Purpose
Used to enable or disable sending of MAC-based Access Control traps.
Syntax
config mac_based_access_control trap state [enable | disable]
Description
When MAC-based Access Control trap state is enabled, The trap of MAC-based
Access Control will be sent out.
If the MAC-based Access Control trap state is disabled, no trap will be sent out.
Parameters
enable – To enable sending MAC-based Access Control traps.
disable – To disable sending MAC-based Access Control traps.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To enable trap state of MAC-based Access Control:
DES-3200-28F:4# config mac_based_access_control trap state enable
Command: config mac_based_access_control trap state enable
Success.
DES-3200-28F:4#