D-Link DES-3200 Switch User Manual


 
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
16
show switch
Purpose
Used to display general information about the Switch.
Syntax
show switch
Description
This command is used to display information about the Switch.
Parameters
None.
Restrictions
None.
Example usage:
To display the Switch’s information:
DES-3200-28:4#show switch
Command: show switch
Device Type : DES-3200-28 Fast Ethernet Switch
MAC Address : 00-63-32-28-01-01
IP Address : 10.90.90.90 (Manual)
VLAN Name : default
Subnet Mask : 255.0.0.0
Default Gateway : 0.0.0.0
Boot PROM Version : Build 1.00.006
Firmware Version : Build 1.28.005
Hardware Version : B1
System Name :
System Location :
System Uptime : 0 days, 2 hours, 53 minutes, 20 seconds
System Contact :
Spanning Tree : Enabled
GVRP : Disabled
IGMP Snooping : Disabled
VLAN Trunk : Disabled
802.1X : Enabled
Telnet : Enabled (TCP 23)
Web : Enabled (TCP 80)
RMON : Enabled
SSH : Disabled
SSL : Disabled
CLI Paging : Enabled
Syslog Global State: Disabled
Dual Image : Supported
Password Encryption Status : Disabled
DES-3200-28:4#