Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
470
enable bpdu_protection
Purpose
Used to globally enable BPDU attack protection on the Switch.
Syntax
enable bpdu_protection
Description
Use this to enable BPDU attack protection.
NOTE: The BPDU Attack Protection function and Spanning Tree Protocol
for ports are mutually exclusive. When the STP function is enabled on a
particular port, BPDU Attack Protection cannot be enabled.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage
To enable BPDU attack protection on the entire Switch:
DES-3200-28F:4# enable bpdu_protection
Commands: enable bpdu_protection
Success.
DES-3200-28F:4#