xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
62
disable snmp
Purpose
Used to disable SNMP trap support on the Switch.
Syntax
disable snmp [authenticate_traps | linkchange_traps | traps]
Description
This command is used to disable SNMP trap support on the Switch.
Parameters
authenticate_traps – This is to disable SNMP authentication trap
support.
linkchange_traps – This is to disable SNMP linkchange trap support.
traps – This is to disable SNMP trap support.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To disable SNMP authentication trap support:
DES-3200-28:4#disable snmp authenticate_traps
Command: disable snmp authenticate_traps
Success.
DES-3200-28:4#
To disable SNMP linkchange trap support:
DES-3200-28:4#disable snmp linkchange_traps
Command: disable snmp linkchange_traps
Success.
DES-3200-28:4#
To prevent SNMP traps from being sent from the Switch:
DES-3200-28:4#disable snmp traps
Command: disable snmp traps
Success.
DES-3200-28:4#