Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
55
Example usage:
To create an SNMP group named “sg1:”
DES-3200-28:
4#create snmp group sg1 v3 noauth_nopriv read_view v1 write_view
v1 notify_view v1
Command: create snmp group sg1 v3 noauth_nopriv read_view v1 write_view v1
notify_view v1
Success.
DES-3200-28:4#
delete snmp group
Purpose
Used to remove an SNMP group from the Switch.
Syntax
delete snmp group <groupname 32>
Description
This command is used to remove an SNMP group from the Switch.
Parameters
<groupname 32> − An alphanumeric name of up to 32 characters that
will identify the SNMP group the new SNMP user will be associated
with.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To delete the SNMP group named “sg1”.
DES-3200-28:4#delete snmp group sg1
Command: delete snmp group sg1
Success.
DES-3200-28:4#
show snmp groups
Purpose
Used to display the group names of SNMP groups currently configured
on the Switch. The security model, level, and status of each group are
also displayed.
Syntax
show snmp groups
Description
This command is used to display the group names of SNMP groups
currently configured on the Switch. The security model, level, and
status of each group are also displayed.
Parameters
None.
Restrictions
None.