Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
255
config authen_enable
TACACS+ server hosts of the TACACS+ server group list.
radius – Adding this parameter will require the user to be
authenticated using the RADIUS protocol from the remote RADIUS
server hosts of the RADIUS server group list.
server_group <string 15> − Adding this parameter will require the
user to be authenticated using a user-defined server group
previously configured on the Switch.
local_enable − Adding this parameter will require the user to be
authenticated using the local user account database on the Switch.
none – Adding this parameter will require no authentication to
access the Switch.
method_list_name – Enter a previously implemented method list
name defined by the user (create authen_enable). The user may add
one, or a combination of up to four of the following authentication
methods to this method list:
tacacs – Adding this parameter will require the user to be
authenticated using the TACACS protocol from a remote TACACS
server.
xtacacs – Adding this parameter will require the user to be
authenticated using the XTACACS protocol from a remote
XTACACS server.
tacacs+ – Adding this parameter will require the user to be
authenticated using the TACACS+ protocol from a remote TACACS+
server.
radius − Adding this parameter will require the user to be
authenticated using the RADIUS protocol from a remote RADIUS
server.
server_group <string 15> − Adding this parameter will require the
user to be authenticated using a user-defined server group
previously configured on the Switch.
local_enable − Adding this parameter will require the user to be
authenticated using the local user account database on the Switch.
The local enable password of the device can be configured using the
“config admin local_password” command.
none – Adding this parameter will require no authentication to
access the administration level privileges on the Switch.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure the user defined method list “Permit” with authentication methods TACACS, XTACACS and local, in that order:
DES-3200-
28:4#config authen_enable method_list_name Zira method tacacs
xtacacs local_enable
Command: config authen_enable method_list_name Zira method tacacs xtacacs
local_enable
Success.
DES-3200-28:4#
To configure the default method list with authentication methods XTACACS, TACACS+ and local, in that order: